Xeigu G90

The G90 from Xeigu Technology is a 20 Watt AM/CW/SSB HF amateur transceiver with SDR architecture and an inbuilt ATU.  It replaces the very successful and highly-regarded X108G in the company's lineup.  The G90 is an entirely new design which shares nothing with its predecessor.  The full color front panel LED is larger than that on the X108G, and now incorporates a spectrum display.

Other refinements include variable software-defined filtering, a CW decoder, and an interface that will allow the G90 to be controlled by a PC as well as linking to the GSOC panadapter.  A multi-function digital microphone is supplied as standard, allowing direct operation of many transceiver functions without the need to touch the front panel.

All G90s are now supplied from the factory with a power cable with a blade fuse.

Xeigu G90 Key Features

  • SDR architecture
  • 45 mm high brightness color TFT LCD screen
  • Frequency coverage 0.5-30MHz, SSB/CW/AM
  • Software-defined filtering
  • Detachable Front Panel/Display Unit
  • IF channel AGC for constant gain
  • Switchable preamplifier & signal attenuator
  • Built-in wide range ATU
  • Twin VFO for split operation
  • PC/Panadapter interface
  • Front and rear handles
  • RF Output power adjustable between 1 & 20 Watts
  • MOS RF output transistors for superior performance
  • High VSWR protection circuitry for output stage
  • Inbuilt CW keyer with rate adjustment

Xeigu G90 Specifications

  • Stray radiation rejection:  ≥ 40 dB
  • Receive frequency range: 0.5 - 30 MHz
  • Transmitting frequency range: All HF Amateur bands (including WARC bands). NB: 60 m coverage is 5330.5 - 5405 MHz
  • Operating modes: SSB (J3E) CW (A1A) AM (A3E) (FM possible with new firmware) 
  • Frequency Stability: ± 2 ppm (power on + 30 minutes) @ 0 ° C - 55 ° C
  • Dynamic range: 90 dB
  • RF output power (max): 20W
  • Spurious response rejection: ≥ 50 dB
  • Carrier suppression: ≥ 50 dB
  • Sideband suppression:  ≥ 50 dB
  • Antenna impedance: 50 Ω
  • Antenna connector: S0239
  • Operating voltage:  12.5 V - 16.5 V DC
  • Current draw:  Receiving: 0.75 A (max)  Transmitting: 8 A (max)
  • Dimensions: 120 x 45 x 210 mm
  • Weight (incl. mic): ± 1700 g

Link to Xeigu G09 Firmware Downloads also check out the CIV programming notes.